PA D2000.2 Car Audio Amplifier

Polk Audio PA D2000.2 Class D 2-channel Car Audio Amplifier

Sleek, Compact, Powerful, and Really Cool

The PA D 2000.2 car audio amplifier is capable of bridging a left and right terminal into a single full range channel with higher output power. For instance, the L-/R+ channels when wired correctly will increase the output power from 125W per channel to a 500W channel (for a 4 ohm load). The most common hookups are two full-range channels or a bridged subwoofer channel.

PA D2000.2 Features:

Super-efficient class D bridgeable design—runs cooler than conventional amps.

High-speed MOSFET switching power supply.

Toroidal transformers—help keep the amplifier’s sleek design under 2 tall while ensuring plenty of clean, efficient power.

Protection—Thermal, DC offset, reverse DC voltage and short circuit protection.

FULL, HPF, BPF switch—selects full range, high pass filter, or band-pass filter for dialing in your crossover for the ideal speaker blending.

Adjustable low & high pass frequency range—enables you to fine tune the blending of your speakers in their frequency range overlap.

Level control—adjusts the gain of the left and right channels to match the output voltage from your head unit.

Line level inputs—accepts line level input from a head unit, preamplifier or, equalizer.

Line level outputs—provides a full range signal for easy connection to additional amplifiers.

Nickel-plated wire terminals & RCA connectors—ensure maximum signal transfer.

Stainless steel hardware—used throughout and will not corrode in humid environments.

SKU: PA D2000.2 Categories: , Tag:

Product Description

Polk Car Audio Amplifier

PA D2000.2 Specs

Amplifier Power Specs RMS Power at 14.4V Watts per channel bridged – 4 ohms 500 watts
Amplifier Power Specs RMS Power at 14.4V Watts per channel NOT bridged @ 1 kHz – 2 ohms 250 watts
Amplifier Power Specs RMS Power at 14.4V Watts per channel NOT bridged @ 1 kHz – 4 ohms 125 watts
Amplifier Specs – 12V & Ground Cable Gauge 4AWG
Amplifier Specs – Channel Notes Bridgeable Class D MOSFET
Amplifier Specs – Channels 2
Dimensions – Product Weight (each) 3.75 pounds
Dimensions Cabinet Dimensions – Depth 6 3/4 (17.14cm) ”
Dimensions Cabinet Dimensions – Height 1 13/16 (4.60cm) ”
Dimensions Cabinet Dimensions – Width 8 1/4 (20.96cm) ”
Dimensions With Panels – Depth 6 3/4 (17.14cm) ”
Dimensions With Panels – Height 1 13/16 (4.60cm) ”
Dimensions With Panels – Width 8 1/4 (20.96cm) ”
Electrical – Distortion at Rated Power 100
Electrical – Max Sensitivity 200mV-6V dB
Electrical – Minimum Impedance Bridged 4 ohms
Electrical – Minimum Impedance Not Bridged 2 ohms
Electrical – Protection Circuitry Thermal, DC offset, reverse DC voltage and short circuit protection; two 25 amp ATC fuses
Electrical – Signal-to-noise (Referenced to rated power) 105 dBA
Electrical – Total Frequency Response 20Hz-20kHz
Electrical High Pass Filter – Filter Frequency 20Hz-4kHz
Electrical High Pass Filter – Filter Slope 12dB/octave
Electrical Low Pass Filter – Filter Frequency 50Hz-5kHz


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.